Lobo Stage X Bronco Front Suspension System | FOX Race 3.0

  • Provides 12.5″ of Front Suspension Travel
  • 4” (per side) wider track width than stock
  • Greatly Improves Handling at Speed in Rough Terrain
  • Eliminates Terrain Feedback Through Steering System
  • Eliminates Bump Steer and Scrub Radius
  • Reduces Punishment on Steering Components
  • Tig Welded 4130 Tubular Upper Links
  • Tig Welded 4130 Boxed Plate Fabricated Lower Links
  • Fully Fabricated Steering Knuckles with 4130 Plate & Billet Components
  • Billet 4340 Floating Lower Shock Pivot
  • Tie Rod Extensions Included
  • Available for 2.5 or 3.0 shock options



SKU: F6-59-311B Categories: , ,



Place your DEPOSIT or Pre-Order NOW!

Purchase this item to pre-order, or CLICK HERE to place a deposit to secure your place among the first available units!

Lobo Off-Road is proud to introduce the next level in suspension performance for the Ford Bronco! Our Stage X Front Suspension System has been race inspired by our multiple decades of offroad racing experience and incorporating the X-Travel technology. All bronco owners know that the steering rack and tie rods are two of the weakest links on the bronco. That is why we teamed up with our friends over at X-Travel, to incorporate their patented virtual pivot system into our kit. Essentially eliminating the heavy loads that have been leaving people stranded on the trails or in the middle of the open desert.

Revolutionary Suspension Technology

X-Travel technology revolutionizes Independent Front offroad Suspension geometry by allowing the wheels to steer on a virtual axis that remains constantly centered through the wheel and tire assembly, throughout its range of suspension travel. The result is a new level of vehicle control at regardless of the speed or terrain, while alleviating punishment on steering components, reducing driver fatigue, and increasing safety.

The Lobo Offroad bronco suspension kit is entirely made out of high quality 4130 chromoly, creating a robust front suspension kit, that provides not only, bind-free location control of the wheel and tire through its range of motion. We also were able to eliminate scrub radius, bump steer and virtually all terrain feedback through the steering system, but also provides confidence to push their vehicles further and faster while maintaining safer control of the vehicle, knowing that the kit is  American made with high grade 4130 chromoly components.

Lobo Stage X Bronco Front Suspension System Includes (per side):

  • Fabricated Steering Knuckle (Upright), 4130 Plate & Billet Components, Fully TIG Welded
  • (2) Fabricated Lower Links, 4130 Box Plate Construction, TIG Welded
  • (2) Tubular Upper Links, 4130 Chromoly, TIG Welded
  • (4) Motorsport Grade Uniball Inner Pivots
  • (4) High Quality Steering Ball Joints
  • Floating Lower Shock Mount, CNC Machined Billet 4130 Chromoly
  • CNC Machined Tie rod extensions (choose HOSS 2.0 or HOSS 3.0)
  • Chromoly Extended CV Axle Center Shaft (Complete Extended CV Axles Optional)
  • High Quality Custom Hardware Kit

Choose Your Shock Package

The Lobo Stage X Bronco Front Suspension System can be used with readily available OE-fit aftermarket front coilovers such as those from Fox and King, but will require a heavier rate coil spring and different lower shock eye than what comes on off-the-shelf coilovers from these manufacturers. For that reason we offer the system pre-bundled with either Fox 2.5 or 3.0 or King 2.5 coilovers already equipped with the correct coil spring and lower shock eye. You are currently browsing our  Lobo suspension kit package that includes Fox Factory Race Series 3.0 Internal Bypass Coilovers with Dual Speed Compression (DSC) adjusters. Additional information for this shock package will be added soon.

If you already own Fox 3.0 Front Coilovers for your Bronco, you may retrofit them for the kit with our Fox 3.0 Bronco Coilover Retrofit Kit for Lobo Stage X Front Suspension, then use our Stage X Bronco Front Suspension System that comes without a shock package.

Choose Your Tie Rod and CV Axle Extensions

The Lobo suspension kit widens the Bronco’s front track width by 4 inches per side, so we have provisions for extending the Bronco’s tie rods and CV axles to match. For the tie rods please choose between HOSS 2.0 and HOSS 3.0 (to match the version of your existing tie rods). If you need help determining which you have, please contact us. For the CV axles, we offer either a “DIY” extended center shaft or a complete set of OE CV axles with the extended center shafts already installed. An RCV “Ultimate CV” option is coming soon.

Suggested Add-Ons

While The Lobo suspension kit system is sold by itself and only converts your Bronco’s front suspension, we recommend upgrading the rear suspension to match performance and track width. Lobo Off-Road offers matching Rear Shock Packages for each of the front suspension configurations, and will soon offer wheel spacers or full width axle assemblies to match.


Additional information

Weight 90 lbs
Tie Rod Ext

HOSS 2.0, HOSS 3.0

Axle Ext

DIY Extended OE Shaft, Complete Extended OE CV Axles


Be the first to review “Lobo Stage X Bronco Front Suspension System | FOX Race 3.0”

Your email address will not be published. Required fields are marked *

Join the WAIT LIST We will inform you when the product is ready to order. Please leave your name and a valid email address below.